Dealing with a clogged, backed-up, blocked, or plugged-up sink can be a frustrating experience. It disrupts your daily routine and can even cause unpleasant odors in your home. Fortunately, there are several easy and quick solutions you can try to unclog your sink and get the water flowing smoothly again.
1. Use a Plunger: One of the most effective tools to unclog a sink is a plunger. Simply place the plunger over the drain, make sure there is enough water to cover the rubber part, and give it a few forceful pumps. The pressure created by the plunger can help dislodge the clog and get the water moving again.
2. Hot Water and Dish Soap: Another simple solution is to pour hot water mixed with dish soap down the drain. The hot water can help break down the grease and grime that may be causing the clog, while the dish soap helps to lubricate the pipes and facilitate the flow of water.
3. Baking Soda and Vinegar: This age-old remedy is popular for its effectiveness. Start by pouring a cup of baking soda down the drain, followed by a cup of vinegar. Let the mixture sit for a few minutes to create a foaming action that can dissolve the clog. Finally, flush the drain with hot water to remove any remaining debris.
4. Wire Hanger: If the clog is not too deep, you can try using a wire hanger to fish out the debris. Straighten the hanger and create a small hook at one end. Carefully insert the hanger into the drain and try to hook onto the clog. Once you have a hold of it, pull it out gently.
5. Chemical Drain Cleaner: If none of the previous methods work, you can try using a chemical drain cleaner. Be sure to follow the instructions carefully and use the recommended amount. These cleaners are designed to dissolve tough clogs, but they can also be harsh on your pipes, so use them sparingly and as a last resort.
Remember, prevention is key to avoiding clogged sinks in the future. Be mindful of what you put down your drain, use a drain stopper to catch any debris, and clean your drains regularly to prevent buildup. By following these simple tips, you can keep your sink flowing smoothly and avoid the hassle of a clogged drain.
Effective Ways to Unclog a Sink
Having a clogged, blocked, or plugged sink can be a frustrating experience. However, there are several effective ways to quickly unclog a sink and get the water flowing freely again.
1. Plunger
A plunger is a simple and effective tool for unclogging a sink. Ensure that there is enough water in the sink to cover the base of the plunger. Place the plunger over the drain and firmly push and pull for about a minute. This action can create suction and dislodge the clog.
2. Baking Soda and Vinegar
A mixture of baking soda and vinegar can also be effective in unclogging a sink. Start by pouring a cup of baking soda down the drain, followed by a cup of vinegar. Let the mixture sit for about 30 minutes, then flush it down with hot water. The chemical reaction between the two substances can help break down and dissolve the clog.
Note: This method is not suitable for sinks with garbage disposals.
3. Hot Water
Sometimes, simply pouring hot water down the drain can be enough to remove a minor clog. Boil a kettle of water and carefully pour it down the drain in small increments. The hot water can help break down any grease or debris causing the blockage.
4. Plumbing Snake
If the clog persists, a plumbing snake can be used to physically remove the blockage. Insert the snake into the drain until you feel resistance, then twist and push it through the clog. Once the snake has passed through the clog, pull it out to remove any debris.
5. Chemical Drain Cleaner
If all else fails, a chemical drain cleaner can be used as a last resort. Follow the instructions on the product carefully, as these cleaners contain strong chemicals. Avoid using excessive amounts and ensure the area is well-ventilated.
Remember to always use caution and safety measures when dealing with clogged sinks. If the clog persists despite your best efforts, it may be best to consult a professional plumber.
Easy and Quick Solutions for a Blocked, Backed Up, or Plugged Sink
If your sink is clogged, plugged, or backed up, it can be a frustrating problem to deal with. However, there are some easy and quick solutions to help you unclog your sink and get the water flowing again.
1. Use a Plunger: A plunger is a simple yet effective tool for unclogging a sink. Place the plunger over the drain and push down firmly, then pull up quickly. Repeat this motion several times to create suction and dislodge the clog. Be sure to cover the overflow drain, if present, with a wet cloth or tape to ensure proper suction.
2. Try a Baking Soda and Vinegar Solution: Mix equal parts baking soda and vinegar in a cup and pour it down the drain. Let it sit for a few minutes, then flush it down with hot water. The mixture will react and create a foaming action that can help break up the clog.
3. Use a Plumbing Snake: If the clog is stubborn and cannot be removed with a plunger, a plumbing snake can be a useful tool. Insert the snake into the drain and rotate it clockwise while applying gentle pressure. Keep feeding the snake into the drain until you feel resistance, then rotate it back and forth to break up the clog.
4. Remove and Clean the P-trap: The P-trap is a U-shaped pipe underneath the sink that can trap debris and cause a clog. Place a bucket or container underneath the P-trap to catch any water that may spill out. Loosen the slip nuts connecting the P-trap to the drain and remove the trap. Clean out any debris and flush the P-trap with hot water before reattaching it to the drain.
5. Call a Professional: If none of the above solutions work, or if you are uncomfortable performing the repairs yourself, it may be time to call a professional plumber. They have the tools and expertise to effectively unclog your sink and ensure that it functions properly.
Remember, prevention is key to avoiding future sink clogs. Avoid pouring grease, coffee grounds, and food scraps down the drain, and use a strainer to catch any hair or debris. Regularly flushing your drains with hot water can also help prevent buildup. By following these easy and quick solutions, you can keep your sink running smoothly and avoid the frustration of a clogged or backed up sink.
Use Boiling Water
If your sink is plugged up or blocked, one of the easiest and most effective methods to unclog it is by using boiling water. This method is safe for most types of sinks and can help loosen and dissolve clogs caused by grease, soap residue, or food particles.
To start, bring a pot or kettle of water to a rolling boil. Carefully pour the boiling water directly into the clogged sink drain, making sure to pour it slowly and in a controlled manner. The hot water will help break down and dislodge the clog, allowing it to flow down the drain.
It’s important to note that boiling water should not be used on sinks made of brittle materials like porcelain, as the extreme temperature could potentially cause damage. If you’re unsure about the type of sink you have, it’s best to consult a professional before attempting this method.
Tips for Using Boiling Water:
- Always take precautions when handling boiling water to avoid burns.
- If the water doesn’t immediately unclog the sink, give it some time to work. You can repeat the process multiple times if necessary.
- This method is most effective for minor clogs. If your sink is severely clogged or the water doesn’t drain at all, it may require a more advanced solution.
Using boiling water can be a quick and simple solution to unclog a sink. However, if the clog persists or you’re unable to resolve the issue on your own, it’s advisable to seek professional help to prevent further damage.
Try a Plunger
If you find that your sink is clogged and none of the other methods have worked, it’s time to try a plunger. A plunger can be an effective tool for unclogging a sink, especially if the blockage is caused by a solid object or debris.
How to Use a Plunger
To use a plunger on a clogged sink, follow these steps:
- First, remove any standing water from the sink using a bucket or cup.
- Place the plunger over the drain so that it covers the entire opening.
- Press the plunger down firmly to create a seal.
- Using quick, up-and-down motions, apply force to the plunger to create suction.
- Continue plunging for about 15-20 seconds.
- Remove the plunger and check if the water is draining properly.
If the sink is still blocked, repeat the plunging process a few more times until the blockage is cleared.
Tips for Effective Plunging
Here are some tips to ensure you get the best results when using a plunger:
- Ensure that the plunger is creating a tight seal over the drain. You may need to add some water to the sink to aid in creating the seal.
- Use a plunger with a flat bottom rather than the cup-shaped plunger. The flat bottom provides better suction.
- Apply enough force when plunging to create a strong suction. This will help dislodge the clog.
- Be patient and persistent. It may take a few rounds of plunging to completely clear the blockage.
If plunging doesn’t unclog the sink, it’s time to move on to other methods such as using a drain snake or calling a professional plumber.
| Pros | Cons |
|---|---|
| Simple and inexpensive method | May not work on stubborn or larger clogs |
| Doesn’t require any special tools or chemicals | Requires physical effort and can be messy |
| Can be done by anyone | May be ineffective if the blockage is deep in the pipes |
Overall, using a plunger is a common and effective solution for unclogging a sink. It’s worth trying before moving on to more advanced methods or seeking professional help.
Make Your Own Drain Cleaner
If you find yourself with a plugged or clogged sink, there’s no need to panic. Instead of rushing to the store to buy expensive chemical drain cleaners, try making your own DIY solution using common household items. This homemade drain cleaner can help remove backed up or blocked drains, saving you time and money.
Vinegar and Baking Soda
One of the most popular and effective DIY drain cleaners is a mixture of vinegar and baking soda. This powerful combination can help break down and dissolve clogs in your sink. Start by pouring a pot of boiling water down the drain to loosen any blockages. Then, sprinkle about half a cup of baking soda into the drain, followed by a cup of vinegar. Cover the drain and let the mixture fizz and bubble for about 10-15 minutes. Finally, flush the drain with hot water to wash away the clog. Repeat if necessary.
Salt and Lemon Juice
Another natural drain cleaner you can make is a mixture of salt and lemon juice. Mix half a cup of salt with half a cup of lemon juice to create a paste. Apply the paste to the clogged sink, paying extra attention to the drain area. Let it sit for a few minutes, then flush the sink with hot water. The abrasive nature of salt, combined with the acidic properties of lemon juice, can help break down and dissolve the blockage.
Note: Before using any DIY drain cleaner, make sure to remove any standing water from the sink. Additionally, always exercise caution and avoid mixing different types of drain cleaners together, as this can be dangerous and potentially harmful.
By using these DIY drain cleaners, you can effectively unclog your sink without resorting to harsh chemicals. Remember to use these methods as preventative measures as well, to keep your sinks flowing freely and prevent future clogs. With a little time and some household items, you can save yourself the hassle and cost of calling a plumber.
Disclaimer: These homemade drain cleaners are suitable for minor clogs only. If your sink remains blocked or the clog persists, it’s recommended to consult a professional plumber.
Use Baking Soda and Vinegar
If your sink is blocked, plugged up, backed up, or clogged, one effective and natural way to unclog it is by using baking soda and vinegar. This method is a popular DIY solution that can help break down the debris causing the blockage and clear the sink.
To start, remove any standing water from the sink using a cup or a bucket. Then, pour about half a cup of baking soda down the drain. Follow this by pouring about one cup of vinegar down the drain. The combination of baking soda and vinegar will create a chemical reaction, producing a fizzing sound and bubbles, which will help dislodge the blockage.
You can let the mixture sit in the drain for about 15-20 minutes to allow it to work its magic. During this time, the fizzing action will help break down any grease, soap scum, or other debris that may be causing the clog.
After the waiting time is up, flush the drain with hot water. This will help push the debris out of the drain and clear any remaining residue. If necessary, you can repeat the process for stubborn clogs.
Using baking soda and vinegar is a natural and environmentally friendly way to unclog your sink. It is also an effective method that can save you money on expensive chemical drain cleaners. Give it a try next time your sink is clogged!
Remove and Clean the Sink Trap
If your sink is blocked, plugged up, or backed up, one of the most effective ways to unclog it is by removing and cleaning the sink trap. The sink trap, also known as the P-trap, is a U-shaped pipe located underneath the sink.
Step 1: Gather the necessary tools
Before you start, gather the following tools:
- Adjustable wrench
- Bucket or container
- Old toothbrush or small brush
Step 2: Prepare the workspace
Place the bucket or container underneath the sink trap to catch any water that may spill during the process.
Step 3: Loosen the slip nuts
Using the adjustable wrench, loosen the slip nuts that connect the sink trap to the pipes. There are usually two slip nuts, one on each side of the trap. Turn them counterclockwise to loosen them.
Step 4: Remove the sink trap
Once the slip nuts are loosened, carefully remove the sink trap from the pipes. Be cautious as there may still be some water remaining in the trap.
Step 5: Clean the sink trap
Take the sink trap to a well-ventilated area and empty the contents into the bucket. Use the old toothbrush or small brush to scrub away any debris or buildup inside the trap. Rinse it thoroughly with water to ensure it’s clean.
Step 6: Reattach the sink trap
After cleaning the sink trap, place it back into position and tighten the slip nuts using the adjustable wrench. Make sure they are securely tightened to prevent any leaks.
Step 7: Test the sink
Turn on the faucet and let the water run to test if the sink is now unclogged. If the water drains properly, the sink trap cleaning was successful.
Step 8: Repeat if necessary
If the sink is still clogged, you may need to repeat the process or try other methods to unclog it.
| Tools | Materials |
|---|---|
| Adjustable wrench | Bucket or container |
| Old toothbrush or small brush | – |
Note: If you are unsure or uncomfortable performing the above steps, it is always recommended to seek professional help to avoid causing further damage to your sink or plumbing system.
Utilize a Plumbing Snake
A plumbing snake, also known as a drain auger, is a long, flexible cable with a spiral, hook-like end. To use it, insert the snake into the drain until you feel resistance. Then, turn the handle clockwise to navigate the snake through the clog. Keep rotating the handle while applying gentle pressure until you feel the snake break through the blockage.
Be cautious when using a plumbing snake, as it can cause damage to your pipes if used incorrectly. Always make sure to follow the manufacturer’s instructions and take safety precautions. Wear gloves and eye protection to protect yourself from any debris that may be dislodged during the process.
Using a plumbing snake is an effective method for unclogging sinks because it physically breaks up the blockage, allowing water to flow freely again. It’s particularly useful for removing more stubborn clogs, such as those caused by a buildup of hair, grease, or soap scum.
Once you’ve successfully cleared the clog with a plumbing snake, run hot water down the drain to flush away any remaining debris. This will help prevent future clogs and keep your sink running smoothly.
Remember, if you’re unsure about using a plumbing snake or the clog persists, it’s best to consult a professional plumber. They have the expertise and specialized tools to handle any plumbing issue and ensure that your sink is properly unclogged.
Use a Wet/Dry Vacuum
If your sink is completely plugged, blocked, or clogged up and none of the previous solutions have worked, using a wet/dry vacuum can be a powerful tool to help remove the obstruction. This method is particularly effective for stubborn clogs that are deep in the pipes and cannot be easily reached with a plunger or drain snake.
To use a wet/dry vacuum, you’ll need to set it to suction mode and attach the appropriate attachment to the end of the hose. Insert the attachment into the drain, creating a tight seal, and turn on the vacuum. The strong suction power of the vacuum will pull the clog out of the pipes and into the vacuum bag or canister.
It’s important to note that using a wet/dry vacuum for this purpose may cause some splashing or mess, so be prepared with towels or a bucket to catch any water that may come out of the drain. Also, make sure to follow the manufacturer’s instructions for your specific wet/dry vacuum model to ensure safe and effective use.
Benefits of Using a Wet/Dry Vacuum
There are several benefits to using a wet/dry vacuum to unclog a sink:
- Powerful suction: Wet/dry vacuums are designed to handle both wet and dry materials, making them highly effective in removing stubborn clogs.
- Quick and easy: This method can quickly remove clogs without the need for harsh chemicals or complicated procedures.
- Versatile: Wet/dry vacuums can be used for a variety of cleaning tasks in addition to unclogging sinks, making them a useful tool to have on hand.
While using a wet/dry vacuum can be an effective solution for unclogging a sink, it’s important to remember that prevention is always better than cure. Avoid pouring grease, oil, or large food chunks down the drain, and use a drain strainer to catch any debris. Regularly cleaning and maintaining your sink can also help prevent future clogs.
Consider Using a Chemical Drain Cleaner
If you’ve tried all the usual methods and your sink is still plugged, it may be time to consider a chemical drain cleaner. These products are specifically designed to dissolve and remove stubborn clogs that can’t be easily cleared with a plunger or a drain snake.
Chemical drain cleaners contain powerful ingredients that work to break down and dissolve the materials causing the blockage in your sink. They are available in different forms, such as liquids or gels, and can be found at most hardware stores or supermarkets.
When to Use a Chemical Drain Cleaner
You may want to consider using a chemical drain cleaner if you have a severely blocked or backed-up sink that is not responding to other unclogging methods. This could be an indication that there is a more serious clog further down the drain pipe, and a chemical drain cleaner can help dissolve and remove the obstruction.
However, it is important to note that chemical drain cleaners are not suitable for all types of plumbing systems. If you have older or corroded pipes, using a chemical drain cleaner may cause further damage. It’s always a good idea to check the instructions of the product and consult a professional plumber if you’re unsure.
How to Use a Chemical Drain Cleaner
Before using a chemical drain cleaner, make sure to protect yourself by wearing gloves and safety goggles. These products contain strong chemicals that can cause skin irritation and eye damage.
First, remove any standing water from the sink using a bucket or a cup. Then, carefully pour the recommended amount of the chemical drain cleaner down the drain. Follow the instructions on the product packaging for the specific wait time.
After the designated time has passed, flush the drain with hot water to help rinse away the dissolved clog. Be cautious not to burn yourself with the hot water. If needed, you can repeat the process to ensure the sink is fully unclogged.
It’s important to remember that chemical drain cleaners should be used as a last resort and should be handled with caution. If you’re unsure or uncomfortable using these products, it’s best to call a professional plumber who can safely and effectively remove the clog.
Try a Combination of Salt, Borax, and Vinegar
If your sink is completely plugged or blocked and other methods have failed to unclog it, you may want to try a combination of salt, borax, and vinegar. This natural remedy can be effective in clearing stubborn clogs and getting your sink back in working order.
Step 1: Start by pouring a cup of salt down the drain.
Step 2: Follow this with a cup of borax.
Step 3: Pour a cup of vinegar into the drain while the salt and borax are still in there.
Step 4: Allow the mixture to sit in the drain for about 15 minutes.
Step 5: After 15 minutes, flush the drain with hot water to see if the clog has been cleared.
This combination works by creating a chemical reaction that can help break up and dissolve clogs in the drain. The salt and borax act as abrasives, while the vinegar helps to break down any organic matter that may be causing the blockage. By using natural ingredients, you can avoid harsh chemicals that can potentially damage your pipes.
If the sink is still backed up after trying this method, it may be time to call a professional plumber.
Use a Zip-It Drain Cleaning Tool
If you have a sink that’s completely backed up or clogged, you’ll want to take a more aggressive approach. One effective tool to use is a Zip-It drain cleaning tool. This handy device is designed to effectively unclog drains by removing hair and other debris that may be blocking the pipes.
How does it work?
The Zip-It drain cleaning tool is a long, thin plastic strip with small barbs along its edges. To use it, simply insert the tool into the clogged drain, pushing it in as far as possible. Then, pull the tool back out slowly, allowing the barbs to catch onto any hair or other blockages in the drain. As you pull the tool out, it will bring the clog up with it, freeing the pipe and allowing the water to flow smoothly again.
Why choose a Zip-It drain cleaning tool?
Using a Zip-It drain cleaning tool is a quick and easy solution to unclog your sink. It requires no chemicals or expensive equipment, making it a budget-friendly option. Plus, it’s eco-friendly, as it doesn’t involve the use of harmful chemicals that can damage your pipes or the environment.
Additionally, the Zip-It drain cleaning tool is versatile and can be used on a variety of drains, including bathroom sinks, shower drains, and tub drains. Its flexible design allows it to navigate through the twists and turns of your plumbing system, ensuring that it reaches and removes any obstructions along the way.
So, the next time your sink is plugged or blocked, don’t panic. Grab a Zip-It drain cleaning tool and get to work. With its simple yet effective design, you’ll have your sink flowing freely again in no time.
Check for and Remove any Hair or Debris
One of the most common reasons a sink can become clogged, plugged, backed up, or blocked is due to the presence of hair or other debris in the drain. Over time, these substances can accumulate and create a barrier that prevents water from flowing freely.
To check for and remove any hair or debris, start by removing the sink stopper or drain cover. This can usually be done by twisting it counterclockwise or lifting it up, depending on the type of stopper or cover.
Once the stopper or cover is removed, use a flashlight to inspect the drain. Look for any visible debris, such as clumps of hair or pieces of soap, and use a pair of gloves or tweezers to carefully remove them. Be cautious not to push the debris further into the drain.
In some cases, the clog may be located further down the pipe and not easily accessible. In this situation, you may need to use a drain snake or other plumbing tool to reach and remove the blockage. Follow the manufacturer’s instructions for proper usage and take care to avoid damaging the pipes.
After removing any visible hair or debris, run hot water down the drain to help flush out any remaining particles. This can help prevent future clogs and keep your sink draining smoothly.
| Pros | Cons |
|---|---|
| Easy to check for and remove hair or debris if accessible | Clogs located further down the pipe may require additional tools |
| Helps prevent future clogs and maintain a smooth drain | May not be effective for persistent or stubborn clogs |
Use a Wire Hanger to Remove Blockages
If your sink is clogged up and you’re tired of dealing with a plugged or blocked drain, using a wire hanger can be an effective solution. This simple and inexpensive tool can help you remove small blockages that are causing your sink to drain slowly or not at all.
To use a wire hanger to unclog your sink, start by straightening the hanger and bending one end into a small hook shape. Insert the hooked end into the drain and gently move it around to dislodge any debris or hair that may be causing the blockage.
Be Gentle to Avoid Damage
It’s important to be gentle when using a wire hanger to unclog your sink to avoid causing any damage to the pipes or further pushing the blockage down. Slowly move the hanger back and forth, making small circular motions to loosen the debris. If you encounter any resistance, do not force it and try a different angle instead.
Finish with Hot Water
After you’ve removed the blockage with the wire hanger, run hot water down the drain for a few minutes to flush out any remaining debris. This will help clear the pipe and ensure that the sink drains properly.
Using a wire hanger to remove blockages in your sink is a quick and easy solution that can save you time and money. However, if the clog persists or if you’re dealing with a more serious blockage, it’s recommended to call a professional plumber to avoid causing further damage.
Consider Using an Enzyme Drain Cleaner
If your sink is clogged up and traditional methods like plunging or using a snake haven’t worked, it may be time to consider using an enzyme drain cleaner. Enzyme drain cleaners are a popular choice for dealing with blocked and backed-up sinks because they offer a gentle and effective solution.
Enzyme drain cleaners use natural enzymes that break down organic matter like food particles, grease, and soap scum that can accumulate in your pipes and cause clogs. These enzymes work by digesting the clog, turning it into a harmless liquid that can easily flow down the drain, unclogging your sink in the process.
One of the benefits of using an enzyme drain cleaner is that it is safe for all types of pipes, including PVC and metal. Unlike harsh chemical drain cleaners, enzyme cleaners will not corrode or damage your pipes, making them a reliable and long-term solution for your clogged sink.
Using an enzyme drain cleaner is also easy. Simply pour the recommended amount of the cleaner down your sink and let it sit for the specified time. The enzymes will start breaking down the clog, and you can then flush the sink with hot water to clear any remaining debris.
While enzyme drain cleaners are effective, they may take longer to work compared to harsh chemical cleaners. However, the gentle and eco-friendly nature of enzyme drain cleaners makes them a popular choice for those who want to avoid harsh chemicals and protect the environment.
Important tip: To prevent future clogs, consider using enzyme drain cleaners on a regular basis as part of your maintenance routine. This will help keep your sink clear and prevent any large build-up of organic matter that can lead to clogs.
Call a Professional Plumber
If you’ve tried all the DIY methods but your sink is still blocked, it’s time to call a professional plumber. While it can be tempting to keep trying to unclog the sink yourself, you risk causing further damage if you’re not experienced in plumbing.
A professional plumber has the knowledge and tools to effectively unclog even the most stubborn sink. They have access to specialized equipment that can remove clogs deep within the pipes, ensuring a thorough and long-lasting solution.
Additionally, a professional plumber can identify the underlying cause of the clog and provide advice on how to prevent future blockages. This can save you time and money in the long run, as you’ll be able to address any plumbing issues before they become more serious.
Remember, if your sink is persistently plugged up and clogged, it’s best to leave it in the hands of a professional. They’ll have your sink back to normal in no time, ensuring you can get back to your daily routine without any hassle.
Prevent Future Clogs with Routine Maintenance
Don’t wait until your sink is backed up or completely plugged to take action. By practicing routine maintenance, you can prevent future clogs and ensure that your sink stays clear and free-flowing.
1. Use a Sink Strainer
A sink strainer is a simple yet effective tool that can help prevent debris from going down your drain. Install a strainer in your sink to catch food scraps, hair, and other particles before they cause a blockage.
2. Avoid Pouring Grease and Oil Down the Sink
Grease and oil can solidify and coat the inside of your pipes, causing them to become blocked over time. Instead of pouring grease down the sink, let it solidify in a container and dispose of it in the trash.
Pro Tip: Wipe excess grease off dishes and cookware with a paper towel before washing them to minimize the amount that goes down the drain.
3. Flush Your Drains Regularly
Once a month, flush your drains with hot water to help break down any buildup and prevent blockages. You can also use a mixture of baking soda and vinegar to naturally remove residue and keep your drains clear.
4. Be Mindful of What You Put in the Sink
Avoid putting items like coffee grounds, eggshells, and fibrous vegetable peels in the sink, as they can easily accumulate and cause blockages. Dispose of these items in the trash or compost them instead.
5. Schedule Professional Drain Cleaning
Even if you take all the necessary precautions, it’s still a good idea to have your drains professionally cleaned on a regular basis. This can help remove any buildup that may be accumulating deep within your pipes and prevent future clogs.
By following these simple steps, you can ensure that your sink stays clear and free of blockages, saving you time and money on expensive plumbing repairs.